1) First open the command prompt(administrator) by right clicking on "cmd" and select "run as a administrator".
2) Then type command "netsh wlan show drivers".
3) Check hosted network support is "Yes" or "Not"?
5) After it, type command "netsh wlan start hostednetwork" and then press enter.
6) In this way you can make wi-fi hot spot and make sure that your wi-fi device is open.
7) If you want to share the internet through your hot spot then process the following steps :
i) Go to control panel and open the "Network and Sharing Center".
ii) Check which connection is you are going to share.
iii) Then click on "Connection".
2) Then type command "netsh wlan show drivers".
3) Check hosted network support is "Yes" or "Not"?
4) Is it is "Yes" then type command "netsh wlan set hostednetwork mode=allow ssid="hot spot name" key="your password" and then enter.
5) After it, type command "netsh wlan start hostednetwork" and then press enter.
6) In this way you can make wi-fi hot spot and make sure that your wi-fi device is open.
7) If you want to share the internet through your hot spot then process the following steps :
i) Go to control panel and open the "Network and Sharing Center".
ii) Check which connection is you are going to share.
iii) Then click on "Connection".
iv) The you'll see the "Sharing" option on the top.
v) Click on it and then do same as show in image
vi) Now click on "OK".
vii) In previous step check your connection that is here is showing "Wireless Network Connection 2" (it can be "Wireless Network Connection" or anything else.)
vii) In this way you will able to share your internet through your Wi Fi.
Thank you for reading this blog..!! :)
